Overcoming Feed Limitations

In this Webinar we review common issues encountered when feeding low bulk density powder components. We also cover some counter-measure solutions to mitigate common feed limitations.

Process Technology

Presenter:

Daron Fraim

CPM Process Solutions

Subscription Required

You do not have permission to see this content. Please login to watch the Webinar.

Login for Access

Remember Me

Lost your password?

Social share

Facebook

Twitter

Related Webinars

A “Practical” Approach to DOE

Process Technology

This webinar provides a step-by-step practical approach to designing and running DOE’s (Design of Experiments) for optimization, process development, etc.

Accuracy in Extruder Scale-Up

Process Technology

This webinar identifies the critical parameters used to translate a compound from lab-scale to production-scale in order to duplicate the properties…

Ask Adam (Part 2)

Process Technology

Here is another opportunity to solve those lingering process problems …just Ask Adam! This webinar is designed as an open forum…

Basics of Dispersive Mixing

Process Technology

Co-rotating twin-screw extruders have been the machine of choice for blending of polymers with additives, colorants and non-reinforcing fillers as a…

Computer Process Simulation for Twin-Screw Compounding

Process Technology

This webinar highlights the use of PolyTech’s WinTXS™ Simulation Software for scale-up, screw design optimization as well as process troubleshooting.

High Performance Elements

Process Technology

This webinar defines a new geometry for twin-screw extruder elements which promotes elongational flow (versus shear flow) for intermeshing and co-rotating…

Installation Guidelines for Screw and Kneading Elements

Process Technology

This webinar presents the correct procedures for installation of standard conveying and mixing elements, ZME’s, eccentric kneading elements and other difficult-to-install…

Introduction to Screw Design – Part 1

Process Technology

This webinar introduces the available screw geometries for intermeshing, co-rotating twin-screw extruders in order to understand how mixing is possible and…

Introduction to Screw Design – Part 2

Process Technology

This webinar describes which type of screw element best fits each of the process requirements for compounding applications on intermeshing, co-rotating…

Introduction to the RingExtruder

Process Technology

This webinar introduces the RingExtruder RE, utilizing twelve co-rotating and intermeshing screws arranged around a central core.

Liquid Injection Technology

Process Technology

This webinar reviews recommended practices for adding liquids to the twin-screw extruder in terms of location for injection ports (e.g. L/D,…

Overcoming Feed Limitations

Process Technology

Increasing the production rate for feed-limited applications of twin-screw extruders is often related to venting of entrained air from the extruder…

Process Troubleshooting for Twin-Screw Compounding Extruders

Process Technology

This webinar provides an overview of factors affecting compound product quality and process instabilities on intermeshing, co-rotating twin-screw extruders.

Process Variables and Interactions

Process Technology

This webinar is designed for compounding applications on intermeshing, co-rotating twin-screw extruders.

Screw Design Optimization: Melting

Process Technology

Screw configurations for resin melting can be developed for maximum productivity or designed to accommodate a wide range of polymers…but not…

Screw Design Optimization: Mixing

Process Technology

Optimizing the mixing part of the screw configuration for improved dispersion of particulate fillers (e.g. talc, mineral, CaCO3, etc.) or improved…

Side Feeding Technology

Process Technology

The basic techniques for optimizing capacity of side feeders is presented in this webinar. While various aspects of side feeding have…

Software Tools for Improved Productivity

Process Technology

This webinar highlights the improvement in productivity through the use of computer software for design of screw configurations and for process…

Solving Vent Problems

Process Technology

Nearly every twin-screw extruder with a vent port has some operational “issues” with material – other than vapor - coming out…

Strategies for Problem Solving

Process Technology

The pattern of variation during a continuous production lot can be used to identify (or eliminate) specific assignable causes depending on…

The Perfect Pellet

Process Technology

This new webinar looks at pellet quality from the customer’s perspective (rather than from the compounder’s perspective). We ask the questions:…

Torque vs. Specific Energy

Process Technology

This webinar describes the concept of specific (mechanical) energy along with it’s practical use as a process setpoint to ensure product…

Twin-Screw Extruder Barrel Temperature Control

Process Technology

The focus of this webinar is on heating & cooling system design for twin-screw extruders.

Ask Adam (Part 1)

Process Technology

Here is your opportunity to solve those lingering process problem …just Ask Adam! This webinar is designed as an open forum…

Installation and Commissioning of Twin Screw Extruders

Machine Design, Maintenance Best Practices, Process Technology

This webinar reviews best practices for efficient installation and commissioning of twin-screw extruders.

Food Extrusion Technology

Machine Design, Process Technology

This webinar provides an overview of the process technology and machine configurations used for production of direct-expanded RTE cereals and snacks…

Compounding Common Additives Using Twin Screw Extrusion

Machine Design, Process Technology

This webinar takes a look at some common additives incorporated into plastics and provides an overview of their purpose. The various…

Wear Audit Preparation/Requirements

Maintenance Best Practices, Process Technology

This webinar details the procedures for conducting wear measurements on extruder screws and barrels, which should be an integral part of…

How Much Extruder Length Do I Really Need?

Applications, Machine Design, Process Technology

This webinar will explore different applications with respect to the extruder L/D. Unit operations such as feeding, melting, mixing, devolatilization, and…